Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
Main menu

ТК-38

Rotating machinery

Active

Main committee

Георги Тодоров Тодоров

Desislava Bozkova

+359 2 817 4557

desislava.bozhkova@bds-bg.org

Electrotechnics

Public documents

Scope

Standards giving specifications and application rules for rotating machines and also standards relating to the mechanical vibration of these machines; Standards for hand-held and transportable electric motor operated tools; Standards giving definitions, general requirements and specification sheets for individual types of insulating materials, test methods; Standards covering methods of evaluation and qualification for electrical insulating materials and systems; Standards covering the general requirements for the construction and testing of electrical apparatus for potentially explosive atmospheres and the specific requirements for the construction and testing of electrical apparatus, type of protection "o" (oil immersed), type of protection "q" (powder filled), type of protection "n", type of protection "p", including that with an internal source of flammable gas and vapours, electrical apparatus with flameproof enclosure, type of protection "d", of intrinsically safe electrical apparatus, type of protection "i", increased safety electrical apparatus, type of protection "e", and types with protection for use in the presence of combustible dusts; Standards covering electrical apparatus for the detection and measurement of combustible gases to be used in industrial and commercial potentially explosive atmospheres; Rules for the installation of electrical apparatus in a potentially explosive atmosphere; Standards for electrical apparatus for sensing the presence of gas or vapour and for providing an indication, alarm and/or other output function

Facts and digits

128

New projects

1134

Published standards

0

Meetings

7

Members

Relation to mirrors committee

This BDS/TC is a mirror of the following European and international technical committees

CLC/SC 31-1

Installation rules


Originator: CENELEC
P member

CLC/SC 31-1

Installation rules

To standardize rules for the installation of electrical apparatus in a potentially explosive atmosphere.


Originator: CENELEC

P member

CLC/SC 31-2

Flameproof enclosures "d"


Originator: CENELEC
P member

CLC/SC 31-2

Flameproof enclosures "d"

To standardize specific requirements for the construction and testing of electrical apparatus with flameproof enclosure, type of protection "d", intended for use in potentially explosive atmospheres.


Originator: CENELEC

P member

CLC/SC 31-3

Intrinsically safe apparatus and systems "i"


Originator: CENELEC
P member

CLC/SC 31-3

Intrinsically safe apparatus and systems "i"

To standardize specific requirements for construction and testing of intrinsically safe electrical apparatus, type of protection "i", intended for use in potentially explosive atmospheres.


Originator: CENELEC

P member

CLC/SC 31-4

Increased safety "e"


Originator: CENELEC
P member

CLC/SC 31-4

Increased safety "e"

To standardize specific requirements for the construction and testing of the following electrical apparatus intended for use in potentially explosive atmospheres : - Increased safety electrical apparatus, type of protection "e", - Caplight for mines susceptible to firedamp.


Originator: CENELEC

P member

CLC/SC 31-5

Apparatus type of protection "n"


Originator: CENELEC
P member

CLC/SC 31-5

Apparatus type of protection "n"

To standardize specific requirements for the construction and testing of electrical apparatus type of protection "n", intended for use in potentially explosive atmospheres.


Originator: CENELEC

P member

CLC/SC 31-7

Pressurization and other techniques


Originator: CENELEC
P member

CLC/SC 31-7

Pressurization and other techniques

To standardize specific requirements for the construction and testing of electrical apparatus, type of protection "p", including that with an internal source of flammable gas and vapour intended for use in potentially explosive atmospheres.


Originator: CENELEC

P member

CLC/SC 31-8

Electrostatic painting and finishing equipment


Originator: CENELEC
P member

CLC/SC 31-8

Electrostatic painting and finishing equipment

To standardize specific requirements for the construction, testing and use of electrostatic paint and powder equipment for spraying flammable materials.


Originator: CENELEC

P member

CLC/SC 31-9

Electrical apparatus for the detection and measurement of combustible gases to be used in industrial and commercial potentially explosive atmospheres


Originator: CENELEC
P member

CLC/SC 31-9

Electrical apparatus for the detection and measurement of combustible gases to be used in industrial and commercial potentially explosive atmospheres

(See also TC 216) General and specific requirements for construction, safety, performance and testing of apparatus for sensing the presence of combustible gases or vapours and for measuring their concentration in industrial and commercial potentially explosive atmospheres.


Originator: CENELEC

P member

CLC/SR 112

Evaluation and qualification of electrical insulating materials and systems (to be defined)


Originator: CENELEC
P member

CLC/SR 112

Evaluation and qualification of electrical insulating materials and systems (to be defined)


Originator: CENELEC

P member

CLC/SR 15

Solid electrical insulating materials


Originator: CENELEC
P member

CLC/SR 15

Solid electrical insulating materials


Originator: CENELEC

P member

CLC/TC 2

Rotating machinery


Originator: CENELEC
P member

CLC/TC 2

Rotating machinery

To prepare harmonized standards giving specifications and application rules for rotating machines based on IEC publication 34 "Rotating electrical machines" and its parts and also standards relating to the mechanical vibration of these machines. New work is concentrated only on subjects which have not already been proposed to IEC TC 2 or to one of its Working Groups.


Originator: CENELEC

P member

CLC/TC 204

Safety of electrostatic painting and finishing equipment


Originator: CENELEC
P member

CLC/TC 204

Safety of electrostatic painting and finishing equipment

To standardize the specific requirements for the protection against high voltage electric shocks in the construction, test and use of electrostatic painting and finishing equipment for spraying non-flammable material.


Originator: CENELEC

P member

CLC/TC 216

Gas detectors


Originator: CENELEC
P member

CLC/TC 216

Gas detectors

To standardize general and specific requirements for the construction, safety, performance and testing for electrical apparatus for sensing the presence of gas or vapour and for providing an indication, alarm and/or other output function, the purpose of which is to give a warning of explosion hazard, fire hazard or health hazard. The standardization work of TC 216 concerns domestic gas detectors and those industrial and commercial gas detectors that are not included in the scope of CLC/SC 31-9. To provide information and guidance, as appropriate, on the selection, installation and operation of such apparatus.


Originator: CENELEC

P member

CLC/TC 116

Safety and environmental aspects of motor-operated electric tools


Originator: CENELEC
P member

CLC/TC 116

Safety and environmental aspects of motor-operated electric tools

To prepare European safety and environmental aspects standards for electric motor-operated hand-held and transportable tools and lawn and garden machinery


Originator: CENELEC

P member

CLC/TC 31

Electrical apparatus for potentially explosive atmospheres


Originator: CENELEC
P member from Apr 1, 2020

CLC/TC 31

Electrical apparatus for potentially explosive atmospheres

To standardize the general requirements for the construction and testing of electrical apparatus for potentially explosive atmospheres and the specific requirements for the construction and testing of electrical apparatus, type of protection "o" (oil immersed) and type of protection "q" (powder filled) and types with protection for use in the presence of combustible dusts, and to co-ordinate the work of the sub-committees dealing with the standardization of specific requirements for other individual types of protection.


Originator: CENELEC

P member from Apr 1, 2020

TC 2

Rotating machinery


Originator: IEC
O member

TC 2

Rotating machinery

To prepare International Standards regarding specifications for rotating electrical machines without limitations of voltage, output or dimensions with the exception of the following:<br /> - Traction motors within the scope of TC 9: Electric railway equipment;<br /> - Motors and generators within the scope of TC 69: Electric road vehicles and electric industrial trucks;<br /> - Motors and generators for use in cars and commercial vehicles;<br /> - Motors and generators for use in aeronautics or space applications.


Originator: IEC

O member

TC 15

Solid electrical insulating materials


Originator: IEC
O member

TC 15

Solid electrical insulating materials

To prepare international standards including specifications for solid electrical insulating materials alone and in simple combinations. This includes coatings which are applied in the liquid state but cure to solids, such as varnishes and coatings.<br /> <br /> Note: TC15 strictly understands "simple combination" as insulation materials (e.g. combined flexible materials according to IEC 60626) and not as combinations of insulation materials due to the manufacturing process of electrical devices. This does not exclude that during testing it might be necessary to include electrodes on specimens of material.<br /> <br /> TC15 establishes definitions, general requirements and specification sheets for individual types of materials. The standards include test methods and guidance where these are required for the specifications.


Originator: IEC

O member

TC 31

Equipment for explosive atmospheres


Originator: IEC
O member

TC 31

Equipment for explosive atmospheres

To prepare and maintain international standards relating to equipment for use where there is a hazard due to the possible presence of explosive atmospheres of gases, vapours, mists or combustible dusts


Originator: IEC

O member

TC 112

Evaluation and qualification of electrical insulating materials and systems


Originator: IEC
O member

TC 112

Evaluation and qualification of electrical insulating materials and systems

To prepare International Standards covering methods of evaluation and qualification for electrical and electronic insulating materials, and electrical insulation systems. Horizontal Safety Function: Test methods for resistance to tracking.<br /> <br /> NOTE: An electrical insulating material has negligibly low electric conductivity, used to separate conducting parts at different electrical potentials. An electrical insulating system is an insulating structure containing one or more electrical insulating materials together with associated conducting parts employed in an electrotechnical device.


Originator: IEC

O member

TC 116

Safety of motor-operated electric tools


Originator: IEC
O member

TC 116

Safety of motor-operated electric tools

To prepare international safety standards for electric motor-operated hand-held tools, transportable tools and lawn and garden machinery.


Originator: IEC

O member

TC 31/SC 31J

Classification of hazardous areas and installation requirements


Originator: IEC
O member from Oct 16, 2019

TC 31/SC 31J

Classification of hazardous areas and installation requirements

To prepare and maintain international standards relating to the use of equipment including area classification, the selection and installation, inspection and maintenance, repair, overhaul and reclamation of equipment where there is a hazard due to the possible presence of explosive atmospheres of gases, vapours, mists or combustible dusts.


Originator: IEC

O member from Oct 16, 2019