Полезнa информация

Обществено допитване

Назад

Предложения за нови европейски стандарти, обявени в CEN

Съгласно Вътрешните правила на CEN/CENELEC и Правилата за работа по националната стандартизация, БИС обявява обществено допитване по предложения за разработване на нови европейски стандарти.

Всеки заинтересован може да изпрати мнение относно конкретно предложение на секретаря на съответния БИС/ТК*.

*Информация за контакт със секретаря на съответния БИС/ТК може да се намери на интернет страницата на БИС: www.bds-bg.org/bg/tc/index.php.


TC № на проекта на стандарт Заглавие Краен срок за мнения БИС/ТК/ПС
CEN/TC 305 Generation of flammable dust clouds for testing of explosion protective systems and devices ТК-1
CEN/TC 191 Fixed firefighting systems — Automatic sprinkler systems — Design and installation of early suppression fast response sprinkler ТК-1
CEN/TC 191 Fixed firefighting systems — Components for sprinkler and water spray systems — Part XX: ESFR sprinklers ТК-1
CEN/TC 305 Explosion absorbing systems ТК-1
CEN/TC 191 prEN 12416-1 rev Fixed firefighting systems — Powder systems — Part 1: Requirements and test methods for components ТК-1
CEN/TC 191 prEN 12845 rev Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance ТК-1
CEN/TC 127 prEN 1364-3 rev Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly) ТК-1
CEN/TC 127 prEN 1364-4 rev Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration ТК-1
CEN/TC 127 prEN 1366-8 rev Fire resistance tests for service installations - Part 8: Smoke extraction ducts ТК-1
CEN/TC 127 prEN 15254-6 rev Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling ТК-1
CEN/TC 51 prEN 196-10 rev Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement ТК-4
CEN/TC 51 prEN 196-2 rev Method of testing cement - Part 2: Chemical analysis of cement ТК-4
CEN/TC 154 Determination of the releasable alkali content of aggregate ТК-5
CEN/TC 104 prEN 1504-5 rev Products for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection ТК-5
CEN/TC 129 Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool. ТК-7
CEN/TC 129 Glass in building - Vacuum insulating glass - Basic specification of products and evaluation methods of performances ТК-7
CEN/TC 106 prEN 203-2-3 rev Gas heated catering equipment - Part 2-3: Specific requirements - Boiling pans ТК-8
CEN/TC 106 prEN 203-2-8 rev Gas heated catering equipment - Part 2-8: Specific requirements - Brat pans and paella cookers ТК-8
CEN/TC 137 Workplace exposure - Application of direct-reading low-cost sensors for measuring NOAA in the workplace ТК-15
CEN/TC 264 prEN 17255-4 "Stationary source emissions —Data acquisition and handling systems — Part 4: Specification of requirements for the installation and on-going quality assurance and quality control of data acquisition and handling Systems" ТК-15
CEN/TC 137 Workplace exposure - Sampling of nano-objects and their agglomerates and aggregates in the workplace for electron microscopy ТК-15
CEN/TC 264 Stationary source emissions - Calibration of elemental and oxidised mercury gas generators for SI-traceable mercury concentration measurements in air ТК-15
CEN/TC 137 Workplace exposure - Counting rules for the characterization of airborne nano-objects and their agglomerates and aggregates for scanning electron microscopy (SEM) and transmission electron microscopy (TEM) ТК-15
CEN/TC 264 Ambient air – Determination of the concentration of levoglucosan – Chromatographic method ТК-15
CEN/TC 264 prEN 16339 rev Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling ТК-15
CEN/TC 203 Design, installation, operation and maintenance of ductile iron pipes for sewer applications ТК-17
CEN/TC 203 Ductile iron pipes, fittings and accessories - Sanitary characteristics and test methods ТК-17
CEN/TC 133 prEN 12449 rev Copper and copper alloys - Seamless, round tubes for general purposes ТК-20
CEN/TC 133 prEN 1978 rev Copper and copper alloys - Copper cathodes ТК-20
CEN/TC 121 prEN 14532-1 rev Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys ТК-30
CEN/TC 121 prEN 14532-2 rev Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys ТК-30
CEN/TC 121 prEN 14532-3 rev Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys ТК-30
CEN/TC 147 EN 17076 (Amd to WI 00147135) Tower cranes — Anti‐collision systems — Safety requirements ТК-31
CEN/TC 147 prEN 14439 rev Cranes - Safety - Tower cranes ТК-31
CEN/TC 275 Foodstuffs - Determination elements and their chemical species - Determination of Ag, As, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Tl, U and Zn by ICP-MS after Pressure Digestion ТК-32
CEN/TC 175 Product Category Rules (PCR) for wood flooring including parquet ТК-33
CEN/TC 175 prCEN/TS 13307-2 rev Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses - Part 2: Production control ТК-33
CEN/TC 112 prEN 1058 rev Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values ТК-33
CEN/TC 175 prEN 13226 rev Wood flooring - Solid parquet elements with grooves and/or tongues ТК-33
CEN/TC 175 prEN 13307-1 rev Timber blanks and semi-finished profiles for non-structural uses - Part 1: Requirements ТК-33
CEN/TC 175 prEN 13442 rev Wood flooring and wood panelling and cladding - Determination of the resistance to chemical agents ТК-33
CEN/TC 175 prEN 13489 rev Wood-flooring and parquet - Multi-layer parquet elements ТК-33
CEN/TC 175 prEN 13556 rev Round and sawn timber - Nomenclature of timbers used in Europe ТК-33
CEN/TC 175 prEN 14220 rev Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications ТК-33
CEN/TC 175 prEN 14221 rev Timber and wood-based materials in internal windows, internal door leaves and internal doorframes - Requirements and specifications ТК-33
CEN/TC 175 prEN 14342 rev Wood flooring and parquet - Characteristics, evaluation of conformity and marking ТК-33
CEN/TC 175 prEN 16449 rev Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide ТК-33
CEN/TC 112 prEN 316 rev Wood fibre boards - Definition, classification and symbols ТК-33
CEN/TC 112 prEN 326-1 rev Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results ТК-33
CEN/TC 112 prEN 326-2 rev Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control ТК-33
CEN/TC 207 prEN 581-2 rev Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 2: Mechanical safety requirements and test methods for seating ТК-33
CEN/TC 112 prEN 622-5 rev Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) ТК-33
CEN/TC 132 prEN 14242 rev Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis ТК-37
CEN/TC 132 prEN 14361 rev Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts ТК-37
CEN/TC 298 prEN 12878 rev Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test ТК-39
CEN/TC 269 Shell boilers - Part 14: Guideline for involvement of an inspection body independent of the manufacturer ТК-41
CEN/TC 269 Water boilers and auxiliary installations - Part 17: Guideline for the involvement of an inspection body independent of the manufacturer ТК-41
CEN/TC 269 prEN 12952-1 rev Water-tube boilers and auxiliary installations - Part 1: General ТК-41
CEN/TC 269 prEN 12952-18 rev Water-tube boilers and auxiliary installations - Part 18: Operating instructions ТК-41
CEN/TC 269 prEN 12952-7 rev Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler ТК-41
CEN/TC 269 prEN 12953-1 rev Shell boilers - Part 1: General ТК-41
CEN/TC 269 prEN 12953-13 rev Shell boilers - Part 13: Operating instructions ТК-41
CEN/TC 269 prEN 12953-2 rev Shell boilers - Part 2: Materials for pressure parts of boilers and accessories ТК-41
CEN/TC 134 Definition and Declaration of Recyclability and Recycling Potential of textile floor coverings. ТК-44
CEN/TC 134 Textile floor coverings – Determination of resistance to damage at cut edges using the castor chair test ТК-44
CEN/TC 134 Definition and declaration of recycled content (organic and inorganic) in textile floor coverings. ТК-44
CEN/TC 134 prEN 1307 rev Textile floor coverings - Specifications ТК-44
CEN/TC 189 prEN ISO 9862 rev Geosynthetics - Sampling and preparation of test specimens ТК-44
CEN/TC 189 prEN ISO 9864 rev Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products ТК-44
CEN/TC 161 Personal protective equipment - Footwear - Test method for slip resistance on icy surfaces ТК-50
CEN/TC 162 Protective gloves for hairdressers – Requirements and test methods ТК-50
CEN/TC 224 Secure and interoperable European Breeder Documents — Part 5: Trust establishment and management processes ТК-57
CEN/TC 224 Secure and interoperable European Breeder Documents — Part 2: Data model ТК-57
CEN/TC 122 Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery ТК-59
CEN/TC 122 prEN 614-1 rev Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles ТК-59
CEN/TC 122 prEN 614-2 rev Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks ТК-59
CEN/TC 260 Liming materials - Determination of the copper and zinc content ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Digestion by aqua regia for subsequent determination of elements ТК-63
CEN/TC 260 Organo-mineral fertilisers - Extraction of phosphorus, which is soluble in neutral ammonium citrate (NAC) for subsequent determination of P by ICP-AES ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Determination of specific parameters ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Determination of inorganic arsenic content ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Determination of the organic carbon content ТК-63
CEN/TC 223 Organic soil improvers and Growing media– Detection of specific pathogens ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Determination of nitrogen content ТК-63
CEN/TC 260 Organo-mineral fertilisers - Extraction of phosphorus by formic acid for subsequent determination of P by ICP-AES ТК-63
CEN/TC 223 Soil improvers – Determination of specific parameters ТК-63
CEN/TC 223 Organic soil improvers - Determination of specific parameters ТК-63
CEN/TC 223 Growing media – Determination of specific parameters ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Determination of the dry matter content ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Determination of the content of P, K, Ca, Mg, Na, S, B, Co, Cu, Fe, Mn, Mo, Zn by ICP-AES after extraction by water ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Extraction by water for subsequent determination of elements ТК-63
CEN/TC 260 Liming materials - Determination of physical and chemical properties and specific contaminants ТК-63
CEN/TC 223 Organic soil improvers - Determination of specific parameters ТК-63
CEN/TC 223 Organic soil improvers and Growing media– Detection of specific pathogens ТК-63
CEN/TC 223 Compost and digestate properties when used in fertilising products ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Determination of biuret content ТК-63
CEN/TC 260 Organic and organo-mineral fertilizers - Determination of mercury content ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Determination of chromium VI content ТК-63
CEN/TC 260 Fertilizers and liming materials - Determination of the phosphonates content in organic, organo-mineral and mineral fertilizers and liming materials ТК-63
CEN/TC 223 Soil improvers – Determination of specific parameters ТК-63
CEN/TC 223 Soil Improvers and Growing media – Determination of specific contaminants ТК-63
CEN/TC 223 Soil Improvers and Growing media – Determination of specific contaminants ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers - Determination of total content of P, K, Ca, Mg, Na, S, B, Co, Cu, Fe, Mn, Mo, Zn, As, Cd, Cr, Ni, Pb by ICP-AES after digestion by aqua regia ТК-63
CEN/TC 260 Organic and organo-mineral fertilisers – Determination of specific elements ТК-63
CEN/TC 223 Compost and digestate properties when used in fertilising products ТК-63
CEN/TC 223 Growing media – Determination of specific parameters ТК-63
CEN/TC 260 Fertilizers and liming materials - Determination of the quantity (mass by volume) for organic, organo-mineral and mineral fertilizers and liming materials ТК-63
CEN/TC 336 prEN 12594 rev Bitumen and bituminous binders - Preparation of test samples ТК-67
CEN/TC 336 prEN 12595 rev Bitumen and bituminous binders - Determination of kinematic viscosity ТК-67
CEN/TC 336 prEN 12596 rev Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary ТК-67
CEN/TC 336 prEN 12597 rev Bitumen and bituminous binders - Terminology ТК-67
CEN/TC 336 prEN 12607-1 rev Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method ТК-67
CEN/TC 19 prEN 16143 rev Petroleum products - Determination of content of Benzo(a)pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils - Procedure using double LC cleaning and GC/MS analysis ТК-67
CEN/TC 226 Road equipment – Interactions between automated vehicles and road infrastructure – Gap and overlap analysis for road equipment in digital geographic infrastructure standards for connected and automated vehicles ТК-68
CEN/TC 226 prEN 1423 rev Road marking materials - Drop on materials - Glass beads, antiskid aggregates and mixtures of the two ТК-68
CEN/TC 256 Railway Applications - New Materials - Process standard for the introduction of new materials ТК-70
CEN/TC 256 Railway applications – Vehicle Maintenance – Safety Critical Components ТК-70
CEN/TC 256 prEN 13231-1 rev Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings ТК-70
CEN/TC 256 prEN 13674-1 rev Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above ТК-70
CEN/TC 256 prEN 14067-4 rev Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track ТК-70
CEN/TC 256 prEN 15085-1 rev Railway applications - Welding of railway vehicles and components - Part 1: General ТК-70
CEN/TC 256 prEN 45545-1 rev Railway applications - Fire protection on railway vehicles - Part 1: General ТК-70
CEN/TC 256 prEN 45545-2 rev Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and products ТК-70
CEN/TC 256 prEN 45545-3 rev Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers ТК-70
CEN/TC 256 prEN 45545-4 rev Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design ТК-70
CEN/TC 256 prEN 45545-5 rev Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles ТК-70
CEN/TC 256 prEN 45545-6 rev Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems ТК-70
CEN/TC 256 prEN 45545-7 rev Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations ТК-70
CEN/TC 261 Packaging - Energy recovery from used packaging ТК-73
CEN/TC 261 Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling ТК-73
CEN/TC 265 Workshop fabricated cylindrical vertical metallic tanks single & double skin, for the storage of flammable and non-flammable water polluting liquids ТК-73
CEN/TC 261 Packaging - Recommendations for conducting life-cycle inventory analysis of packaging systems ТК-73
CEN/TC 261 Packaging - Material recovery - Criteria for a minimum content of recycled material ТК-73
CEN/TC 261 Packaging - Marking and material identification system ТК-73
CEN/TC 261 Packaging - Optimization of energy recovery from packaging waste ТК-73
CEN/TC 261 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging ТК-73
CEN/TC 265 prEN 14620-6 Design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and –196 °C - Part 6: Specific requirements for the design and construction of tank systems for the storage of liquid oxygen, liquid nitrogen or liquid argon ТК-73
CEN/TC 265 prEN 14620-7 Design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and –196 °C - Part 7: Specific requirements for the design and construction of tank systems for the storage of liquefied ammonia ТК-73
CEN/TC 134 Definition and declaration of recycled content (organic and inorganic) in textile floor coverings. ТК-81
CEN/TC 134 Definition and Declaration of Recyclability and Recycling Potential of textile floor coverings. ТК-81
CEN/TC 134 Textile floor coverings – Determination of resistance to damage at cut edges using the castor chair test ТК-81
CEN/TC 134 prEN 1307 rev Textile floor coverings - Specifications ТК-81
CEN/TC 126 Acoustics — Laboratory measurement of sound insulation of building elements — measurement of rolling sound insulation ТК-82
CEN/TC 159 EN 13819-3:2019/prA1 Hearing protectors - Testing - Part 3: Supplementary acoustic test methods ТК-82
CEN/TC 159 EN 13819-3:2019/prA2 Hearing protectors - Testing - Part 3: Supplementary acoustic test methods ТК-82
CEN/TC 159 EN 13819-3:2019/prA3 Hearing protectors - Testing - Part 3: Supplementary acoustic test methods ТК-82
CEN/TC 159 EN 352-6:2018/prA1 Hearing protectors - Safety requirements - Part 6: Earmuffs with safety-related audio input ТК-82
CEN/TC 159 EN 352-9:2018/prA1 Hearing protectors - Safety requirements - Part 9: Earplugs with safety-related audio input ТК-82
CEN/TC 159 FprEN 352-10/prA1 Hearing protectors - Safety requirements - Part 10: Entertainment audio earplugs ТК-82
CEN/TC 159 FprEN 352-8/prA1 Hearing protectors - Safety requirements - Part 8: Entertainment audio earmuffs ТК-82
CEN/TC 126 prEN 12354-7 Building Acoustics - Estimation of building performance from the performance of elements - Part 7: ground-borne sound insulation against outdoor ground vibration ТК-82
CEN/TC 159 prEN 352-11 Hearing protectors - Safety requirements - Part 11: Active noise reduction earplugs ТК-82
CEN/TC 165 Mortar for the construction and rehabilitation of drains and sewers outside buildings - Part 1: General functional requirements and characteristics ТК-83
CEN/TC 165 Mortar for the construction and rehabilitation of drains and sewers outside buildings - Part 3: Requirements for polymeric materials ТК-83
CEN/TC 165 Mortar for the construction and rehabilitation of drains and sewers outside buildings - Part 2: Requirements for cement-based materials ТК-83
CEN/TC 321 Explosives for civil uses – Assessment of on-site mixed explosives and associated manufacturing units ТК-86
CEN/CLC/JTC 3 EN ISO 80369-3:2016/prA1 Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016) ТК-87
CEN/TC 346 Conservation of cultural heritage-Determination of water absorption by contact sponge method ТК-94
CEN/TC 278 Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 11: Management of Electronic Traffic Regulations (METR) publication ТК-97
CEN/TC 278 prCEN/TS 15531-4 rev Public transport - Service interface for real-time information relating to public transport operations - Part 4: Functional service interfaces: Facility monitoring ТК-97
CEN/TC 278 prCEN/TS 15531-5 rev Public transport ‐ Service interface for real‐time information relating to public transport operations ‐ Part 5: Functional service interfaces: Situation exchange ТК-97
CEN/TC 278 prEN 15531-1 rev Public transport - Service interface for real-time information relating to public transport operations - Part 1: Context and framework ТК-97
CEN/TC 278 prEN 15531-2 rev Public transport - Service interface for real-time information relating to public transport operations - Part 2: Communications infrastructure ТК-97
CEN/TC 278 prEN 15531-3 rev Public transport - Service interface for real-time information relating to public transport operations - Part 3: Functional service interfaces ТК-97
CEN/TC 52 EN 71-3:2019/prA2 Safety of toys - Part 3: Migration of certain elements ТК-98
CEN/TC 151 prEN 13042-3 rev Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines ТК-100
CEN/TC 350 prEN 15978-2 Sustainability of construction works - Methodology for the assessment of buildings - Part 2: Social performance ТК-101
CEN/TC 74 Flanges and their joints - Design rules for gasketed circular flange connections - Part 6: Background information ТК-104
CEN/TC 319 Maintenance — Control of risks related to energies and fluids during maintenance operations ТК-104
CEN/TC 267 Metallic industrial piping - Part 10: Additional requirements for piping of titanium and titanium alloys ТК-104
CEN/TC 267 EN 13480-3:2017/prA7 Metallic industrial piping - Part 3: Design and calculation 30.04.2023 ТК-104
CEN/TC 267 EN 13480-4:2017/prA3 Metallic industrial piping - Part 4: Fabrication and installation ТК-104
CEN/TC 267 EN 13480-5:2017/prA3 Metallic industrial piping - Part 5: Inspection and testing ТК-104
CEN/TC 267 EN 13480-8:2017/prA1 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping ТК-104
CEN/TC 74 prEN 12560-6 rev Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges ТК-104
CEN/TC 69 prEN 13397 rev Industrial valves - Metallic diaphragm valves ТК-104
CEN/TC 74 prEN 1514-6 rev Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges ТК-104
CEN/TC 216 prEN 14204 rev Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) ТК-0/ПС-11
CEN/TC 216 prEN 14349 rev Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test method and requirements (phase 2, step 2) ТК-0/ПС-11
CEN/TC 452 Assistance Dogs – Accessibility and Universal Access ТК-0/ПС-31
CEN/TC 452 Assistance Dogs — Training and Assessment ТК-0/ПС-31
CEN/TC 452 "Assistance Dogs — Dog Lifetime Welfare" ТК-0/ПС-31
CEN/TC 452 Assistance Dogs – Client Services ТК-0/ПС-31
CEN/TC 166 Thermal insulation products for building equipment and industrial installations - Determination of soot fire resistance of thermal insulation products for the use in chimneys ТК-0/ПС-35
CEN/TC 50 Lighting columns – Installation, operation and maintenance ТК-0/ПС-35
CEN/TC 166 prEN 14471 rev Chimneys - System chimneys with plastic flue liners - Requirements and test methods ТК-0/ПС-35
CEN/TC 166 prEN 16475-4 rev Chimneys - Accessories - Part 4: Flue dampers - Requirements and test methods ТК-0/ПС-35