БДС EN 60601-1-6:2010

Стандартът е наличен на PDF файл и на хартия.

Електромедицински апарати. Част 1-6: Общи изисквания за основна безопасност и съществени характеристики. Допълващ стандарт: Приложимост (IEC 60601-1-6:2010)

Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

IEC 60601-1-6:2010 определя процесите при производителя за анализ, спецификация, проектиране и проверка и валидиране на приложимостта, както тя се отнася към основната безопасност и съществените характеристики на електромедицинските апарати. Този процес на приложен инженеринг намалява риска причинен от проблеми на приложимост свързана с правилно използване и нормална употреба.

IEC 60601-1-6:2010 specifies a process for a manufacturer to analyse, specify, design, verify and validate usability, as it relates to basic safety and essential performance of medical electrical equipment. This usability engineering process assesses and mitigates risks caused by usability problems associated with correct use and use errors, i.e., normal use. It can be used to identify but does not assess or mitigate risks associated with abnormal use. If the usability engineering process detailed in this collateral standard has been complied with and the acceptance criteria documented in the usability validation plan have been met (see 5.9 of IEC 62366:2007), then the residual risks, as defined in ISO 14971, associated with usability of me equipment are presumed to be acceptable, unless there is objective evidence to the contrary (see 4.1.2 of IEC 62366:2007). The object of this collateral standard is to specify general requirements that are in addition to those of the general standard and to serve as the basis for particular standards. This document cancels and replaces the second edition of IEC 60601-1-6 which has been technically revised. It was revised to align with the usability engineering process in IEC 62366. To allow for equipment manufacturers and testing organizations to make products and to equip themselves for conducting revised tests in accordance with this third edition, it is recommended by SC 62A that the content of this document not be adopted for mandatory implementation earlier than 3 years from the date of publication for equipment newly designed and not earlier than 5 years from the date of publication for equipment already in production.

БДС EN 60601-1-6:2010 заменя и отменя БДС EN 60601-1-6:2008 на 2013-05-17