Полезнa информация

Обществено допитване

Назад

Предложения за нови международни стандарти, обявени в ISO

Съгласно Правилата за работа по националната стандартизация, БИС обявява обществено допитване по предложения за разработване на нови международни стандарти (ISO).

Всеки заинтересован може да изпрати мнение относно конкретно предложение на секретаря* на съответния БИС/ТК.

*Информация за контакт със секретаря на съответния БИС/ТК може да се намери на интернет страницата на БИС: www.bds-bg.org/bg/tc/index.php.


TC № на проекта на стандарт Заглавие Краен срок за мнения БИС/ТК/ПС
ISO/TC 92/SC 2 ISO/NP 20902-2 Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries - Part 2: Additional procedures for pipe penetration and cable transit sealing systems ТК-1
ISO/TC 21/SC 3 ISO/NP 7240-31 Fire detection and fire alarm systems - Part 31: Resettable line-type heat detectors ТК-1
ISO/TC 21/SC 8 ISO/NP 14520-17 Gaseous fire-extinguishing systems - Physical properties and system design - Part 17: Halocarbon Blend 55 ТК-1
ISO/TC 92/SC 4 ISO/NP 20414 Fire safety engineering - Verification and validation protocol for building fire evacuation models ТК-1
ISO/TC 92/SC 2 ISO/NP 23693-2 Determination of the resistance to gas explosions of passive fire protection materials - Part 2: Divisional elements ТК-1
ISO/TC 92/SC 2 ISO/NP 23693-3 Determination of the resistance to gas explosions of passive fire protection materials - Part 3: Structural elements ТК-1
ISO/TC 10/SC 6 ISO/NP 24351 General requirements of three-dimensional modeling for mechanical products ЕРГ 2
ISO/TC 160/SC 1 ISO/NP 23237 Glass in building-Testing method of light transmittance for glass photovoltaic(PV) module in buildings ТК-7
ISO/TC 216 ISO/NP 24263 FOOTWEAR. ATTACHMENT STRENGTH OF STRAPS, TRIMS AND ACCESORIES ТК-11
ISO/TC 216 ISO/NP 24264 FOOTWEAR. ATTACHMENT STRENGTH OF TOP PIECES ТК-11
ISO/TC 216 ISO/NP 24265 FOOTWEAR. TEST METHODS FOR UPPERS-FASTNESS TO RUBBING USING A RUBBER PAD ТК-11
ISO/TC 216 ISO/NP 24266 FOOTWEAR. TEST METHODS FOR WHOLE SHOE-FLEXING DURABILITY ТК-11
ISO/TC 216 ISO/NP 24267 FRICTION. TEST METHODS FOR CASUAL FOOTWEAR AND COMPONENTS ТК-11
ISO/TC 69/SC 6 ISO/NP 24185 The evaluation of the uncertainty of measurements from an autocorrelated process ТК-12
ISO/TC 22 ISO/NP 24195 Road vehicles - Vocabulary for engineering of starting devices and electrical generators ТК-14
ISO/TC 22 ISO/NP 19642-11 Road vehicles - Automotive cables - Part 11: Dimensions and requirements - Coaxial RF cables with a specified analog bandwidth up to 6 GHz (20 GHZ) ТК-14
ISO/TC 22 ISO/NP 19642-12 Road vehicles - Automotive cables - Part 12: Unscreened paired or quad RF cables with a specified analog bandwidth up to 1 GHz ТК-14
ISO/TC 22 ISO/NP 22135 Road vehicles- Heavy commercial vehicles and buses - Calculation for steady state roll-over threshold ТК-14
ISO/TC 22 ISO/NP 19612 Road vehicles - Diesel engine fuel filters - Single pass method of evaluating filtration performance of a fuel filter under cyclic flow conditions in combination with mechanical vibration ТК-14
ISO/TC 22 ISO/NP 24219 Road vehicles - Submergence test methods for power window switches ТК-14
ISO/TC 22 ISO/NP 20766-7 Road vehicles - Liquefied petroleum gas (LPG) fuel systems components - Part 7: Remotely controlled service valve with excess flow valve ТК-14
ISO/TC 22 ISO/NP 20766-8 Road vehicles - Liquefied petroleum gas (LPG) fuel systems components - Part 8: Fuel pump ТК-14
ISO/TC 147/SC 6 ISO/NP 24302 Water quality- Sea water- Sampling for the parameters of the oceanic carbon dioxide system ТК-15
ISO/TC 147/SC 5 ISO/NP 24295 Water quality - Determination of the dioxin-like potential of water and wastewater - Method using in vitro mammalian cell-based reporter gene assay ТК-15
ISO/TC 207/SC 2 ISO/NP 14017 Requirements and guidelines for validation and verification of water information and related reports ТК-15
ISO/TC 207/SC 2 ISO/NP 14015 Environmental management - Environmental Due Diligence Assessment (revision of ISO 14015:2001) ТК-15
ISO/TC 207/SC 2 ISO/NP 24176 Environmental management - Environmental Due Diligence Assessment (revision of ISO 14015:2001 ТК-15
ISO/TC 17 ISO/NP 14404-4 Calculation method of carbon dioxide emission intensity from iron and steel production - Part 4: Part 4: Guidance for using ISO 14404 family ТК-17
ISO/TC 217 ISO/NP TS 22176 Cosmetics - Analytical methods - Development of a global approach for validation of quantitative analytical methods ТК-19
ISO/TC 217 ISO/NP TS 24268 Cosmetics - Analytical methods - Development of a global approach for validation of quantitative analytical methods ТК-19
ISO/TC 23/SC 18 ISO/NP TS 24258 Agricultural irrigation equipment - Filters - Determination of filtration grade ТК-23
ISO/TC 23/SC 19 ISO/NP 11783-7 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 7: Implement messages application layer ТК-23
ISO/TC 23/SC 19 ISO/NP 11783-13 Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 13: File server ТК-23
ISO/TC 23/SC 2 ISO/NP 5674 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria ТК-23
ISO/TC 23/SC 2 ISO/NP 24350 Tractors - Draft Control system - Test method ТК-23
ISO/TC 23/SC 15 ISO/NP 24324 Amendment to ISO 8082-1 - Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 1: General Machines ТК-23
ISO/TC 213 ISO/NP 25178-700 Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments ТК-28
ISO/TC 260 ISO/NP TS 24178 Human Resource Management - Organizational culture metrics cluster ТК-0/ПС-29
ISO/TC 260 ISO/NP TS 24179 Human Resource Management - Occupational Health and Safety Metrics - Technical Specification ТК-0/ПС-29
ISO/TC 260 ISO/NP 30426 Compensation System ТК-0/ПС-29
ISO/TC 44/SC 13 ISO/NP 5179 Investigation of brazeability with spreading and gap-filling test ТК-30
ISO/TC 44/SC 10 ISO/NP 24255 Welding Welding of reinforcing steel ТК-30
ISO/TC 44/SC 11 ISO/NP 9606-9606 Qualification test of welders - Part 9606: Fusion welding ТК-30
ISO/TC 34/SC 3 ISO/NP 24220 PAOCAI(Salted fermented Vegetables)-Specification and Test Methods ТК-32
ISO/TC 34/SC 2 ISO/NP 771 Oilseed meals - Determination of moisture and volatile matter content ТК-32
ISO/TC 165 ISO/NP 24322 Timber structures - Methods of test for evaluation of long-term performance - Part 1: wood-based products in bending ТК-33
ISO/TC 165 ISO/NP 24323 Design methods for vibrational serviceability of timber floors ТК-33
ISO/TC 238 ISO/NP TS 20049-2 Solid biofuels - Determination of self-heating of pelletized biofuels - Part 2: Part 2: Basket heating tests ТК-33
ISO/CASCO ISO/IEC NP 17030 Conformity assessment - General requirements for third-party marks of conformity ТК-34
ISO/TC 35 ISO/NP 24257-1 Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Part 1: Guidance for the selection of test methods ТК-39
ISO/TC 35 ISO/NP 24257-3 Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Part 3: Gravimetric method for VOC determination ТК-39
ISO/TC 35 ISO/NP 24257-4 Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Part 4: Gas-chromatographic method with headspace injection for VOC determination ТК-39
ISO/TC 35/SC 12 ISO/NP 11124-6 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 6: Recyclable Encapsulated Abrasive Media ТК-39
ISO/TC 180 ISO/NP 22975-4 Solar energy - Collector components and materials - Part 4: Part 4: Glazing material durability and performance ТК-41
ISO/TC 180/SC 4 ISO/NP 24194 Solar energy - Collector fields - Check of performance ТК-41
ISO/TC 107/SC 7 ISO/NP 24284 Metallic coatings - Corrosion Test Method under De- icing Salt Environment ТК-42
ISO/TC 107 ISO/NP 24296 Wire, bar and tube drawing dies - diamond coated pellets - specifications ТК-42
ISO/TC 156/SC 1 ISO/NP 24239 General Requirements for Fossil Fuel Power Plants Corrosion Control Engineering Life Cycle ТК-42
ISO/TC 156/SC 1 ISO/NP 24240 General requirements for chemical plant and facility corrosion control engineering life cycle ТК-42
ISO/TC 156/SC 1 ISO/NP 24241 General requirements for corrosion control engineering life cycle of offshore wind power installations and facilities ТК-42
ISO/TC 156/SC 1 ISO/NP 24242 Technical specifications for corrosion control engineering life cycle - Intelligentization ТК-42
ISO/TC 107 ISO/NP 23131 Ellipsometry - Principles ТК-42
ISO/TC 107 ISO/NP 23216 Carbon based films - Determination of optical property of amorphous carbon films by spectroscopic ellipsometry ТК-42
ISO/TC 38 ISO/NP 24040 Textiles - Determination of certain benzotriazole compounds ТК-44
ISO/TC 38/SC 23 ISO/NP 24180 Textiles-Synthetic fibers-Determination of electrical resistance of filament yarns ТК-44
ISO/TC 38/SC 24 ISO/NP 24281 Textiles - Biaxial tensile properties of woven fabric - Determination of maximum force and elongation at maximum force using the grab method ТК-44
ISO/TC 94/SC 6 ISO/NP 12312-3 Eye and face protection - Sunglasses and related eyewear - Part 3: Sunglasses for active lifestyle sport ТК-50
ISO/TC 199 ISO/NP 29042-10 ISO/NP 29042-10, Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 10: Test bench method for the measurement of the decontamination index of air cleaning systems ТК-52
ISO/TC 182 ISO/NP 24283-1 Geotechnical investigation and testing - Qualification criteria and assessment - Part 1: Qualified technician ТК-55
ISO/TC 182 ISO/NP 24283-2 Geotechnical investigation and testing - Qualification criteria and assessment - Part 2: Responsible expert ТК-55
ISO/TC 182 ISO/NP 24283-3 Geotechnical investigation and testing - Qualification criteria and assessment - Part 3: Qualified enterprise ТК-55
ISO/IEC JTC 1/SC 31 ISO/IEC NP 18000-63 Information technology - Radio frequency identification for item management - Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C ТК-57
ISO/IEC JTC 1/SC 42 ISO/IEC NP 24300 Information technology - Artificial intelligence -Process management framework for Big data analytics ТК-57
ISO/IEC JTC 1/SC 40 ISO/IEC NP 24286 Information technology - Continual Performance Improvement - Concepts and Terminology ТК-57
ISO/IEC JTC 1/SC 40 ISO/IEC NP 30105-8 Information technology - IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes - Part 8: Continual Performance Improvement (CPI) of ITES-BPO ТК-57
ISO/IEC JTC 1/SC 35 ISO/IEC NP 17549-3 Information technology - User interface guidelines on menu navigation - Part 3: Navigation with 1-direction devices ТК-57
ISO/IEC JTC 1/SC 35 ISO/IEC NP 17549-1 Information technology - User interface guidelines on menu navigation - Part 1: Framework ТК-57
ISO/IEC JTC 1/SC 37 ISO/IEC NP 24357 Face image quality assessment ТК-57
ISO/IEC JTC 1/SC 37 ISO/IEC NP 24358 Face-aware capture subsystem specifications ТК-57
ISO/IEC JTC 1/SC 35 ISO/IEC NP 20071-5 Information technology - User interface component accessibility - Part 5: Accessible user interface for accessibility settings on information devices ТК-57
ISO/IEC JTC 1/SC 17 ISO/IEC NP TS 24192-1 Public transport - Communication between contactless readers and fare media - Part 1: Part 1: Implementation requirements for ISO/IEC 14443 ТК-57
ISO/IEC JTC 1/SC 17 ISO/IEC NP TS 24192-2 Public transport - Communication between contactless readers and fare media - Part 2: Part 2: Test plan for ISO/IEC 14443 ТК-57
ISO/IEC JTC 1/SC 37 ISO/IEC NP 30108-2 Information technology - Biometric Identity Assurance Services - Part 2: REST-based implementation ТК-57
ISO/IEC JTC 1/SC 40 ISO/IEC NP TS 38508 Information technology - Governance of data - Guidelines for data classification ТК-57
ISO/IEC JTC 1/SC 29 ISO/IEC NP 18181 JPEG XL Image Coding System ТК-57
ISO/TC 159/SC 3 ISO/NP 24227 Accuracy evaluation protocol for daily living walking speed extracted from sensor systems that measure human body motion ТК-59
ISO/TC 67/SC 2 ISO/NP 24177 Petroleum, petrochemical and natural gas industries. Internal coatings for corrosion protection of steel pipes, bends and fittings used in pipeline transportation systems ТК-60
ISO/TC 205 ISO/NP 16815 Building environment design - Design and evaluation of indoor thermal environment ТК-61
ISO/TC 163/SC 1 ISO/NP 24104 Thermal insulating products for building applications - Determination of length and width ТК-61
ISO/TC 163/SC 1 ISO/NP 24105 Thermal insulating products for building applications - Determination of thickness ТК-61
ISO/TC 163/SC 1 ISO/NP 24107 Thermal insulating products for building applications - Determination of flatness ТК-61
ISO/TC 163/SC 1 ISO/NP 24108 Thermal insulating products for building applications - Determination of compression behaviour ТК-61
ISO/TC 163/SC 1 ISO/NP 24109 Thermal insulating products for building applications - Determination of tensile strength parallel to faces ТК-61
ISO/TC 163/SC 1 ISO/NP 24110 Thermal insulating products for building applications - Determination of linear dimensions of test specimens ТК-61
ISO/TC 163/SC 1 ISO/NP 24111 Thermal insulating products for building applications - Determination of thickness for floating-floor insulating products ТК-61
ISO/TC 163/SC 3 ISO/NP 24260 Thermal insulation products--Hemp fiber mat and board--Specification ТК-61
ISO/TC 163/SC 3 ISO/NP 24285 Thermal insulation for building equipment and industrial applications - Cellular Glass products - Specification ТК-61
ISO/TC 163/SC 1 ISO/NP 29469 Thermal insulating products for building applications - Determination of compression behaviour ТК-61
ISO/TC 28/SC 2 ISO/NP 7278-6 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 6: Pipe Provers ТК-67
ISO/TC 28/SC 4 ISO/NP 12925-2 Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 2: Specifications of categories CKH, CKJ and CKM (lubricants open and semi-enclosed gear systems) ТК-67
ISO/TC 6 ISO/NP 24215 Lignins - Determination of carbohydrate composition in kraft and biorefinery lignin ТК-73
ISO/TC 104/SC 4 ISO 6346:1995/NP Amd 4 ISO 6346 - Freight containers - Coding, identification and marking-Amendment 4 ТК-73
ISO/TC 6 ISO/NP 24196 Lignins - Determination of lignin content in kraft and biorefinery lignin ТК-73
ISO/TC 122 ISO/NP 24259 Steel Strapping for Packaging ТК-73
ISO/TC 45/SC 3 ISO/NP 22768 Raw rubber and rubber latex - Determination of the glass transition temperature by differential scanning calorimetry (DSC) ТК-76
ISO/TC 45/SC 3 ISO/NP 24329 Low-protein natural rubber concentrate - Specification ТК-76
ISO/TC 45/SC 1 ISO/NP 24182 Non-Percolating Layflat Firefighting Delivery Hoses - Specification ТК-76
ISO/TC 31/SC 7 ISO/NP 24145 Test method for endurance of solid tyres - Drum method ТК-76
ISO/TC 301 ISO/NP 50010 Title missing ТК-79
ISO/TC 154 ISO/NP 34300 Date and time - Codes for calendar systems ТК-80
ISO/TC 215 ISO/NP TS 82304-2 Health software - Part 2: Health and wellness apps-Quality criteria across the life cycle-Code of Practice ТК-80
ISO/TC 138/SC 8 ISO/NP 24191 ISO 11296-9, Plastics piping systems for the renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer ТК-81
ISO/TC 61/SC 14 ISO/NP 24187 Principles for the development of standards for investigation procedures of plastics in environmental media and materials ТК-81
ISO/TC 61/SC 11 ISO/NP 24282 Test methods for wood-plastic recycled composite ТК-81
ISO/TC 61/SC 10 ISO/NP 17880 Cellular plastics - Self-supporting metal faced sandwich panels ТК-81
ISO/TC 108/SC 6 ISO/NP 10813-4 Vibration-generating machines - Guidance for selection - Part 4: Equipment for multi-axial environmental testing ТК-82
ISO/TC 68/SC 8 ISO/NP TS 24165 Reference data for financial services - Digital token identifier - Registration, assignment and structure ТК-84
ISO/TC 68/SC 2 ISO/NP 24277 Financial services-Biometrics-Security framework ТК-84
ISO/TC 68/SC 2 ISO/NP 16609 Financial services - Requirements for message authentication using symmetric techniques ТК-84
ISO/TC 68/SC 2 ISO/NP 19092 Financial services - Biometrics - Security framework ТК-84
ISO/TC 173 IEC/NP 60601-2 Medical electrical equipment - Part 2: Particular requirements for the basic safety and essential performance of medical beds for children ТК-87
ISO/TC 106/SC 2 ISO/NP 9333 Dentistry - Brazing materials ТК-87
ISO/TC 76 ISO/NP 24166-2 Snap-on Bottles for Metering Pumps - Part 2: Moulded Glass ТК-87
ISO/TC 76 ISO/NP 24166-3 Snap-on Bottles for Metering Pumps - Part 3: Plastic ТК-87
ISO/TC 76 ISO/NP 24166-1 Snap-on Bottles for Metering Pumps - Part 1: Tubing Glass ТК-87
ISO/TC 212 ISO/NP 21474-2 In vitro diagnostic medical devices - Multiplex molecular testing for nucleic acids - Part 2: Part 2 - Validation and Verification ТК-87
ISO/TC 150/SC 2 ISO/NP 25539-4 Cardiovascular implants - Endovascular devices - Part 4: Part 4: Application of ISO 17327-1 for coated endovascular devices ТК-87
ISO/TC 106/SC 8 ISO/NP 10451 Dentistry - Contents of technical file for dental implant systems ТК-87
ISO/TC 212 ISO/NP 20184-3 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for frozen tissue - Part 3: Isolated DNA ТК-87
ISO/TC 241 ISO/NP 39003 Road Traffic Safety (RTS) - Guidance on ethical considerations for autonomous vehicles ТК-97
ISO/TC 204 ISO/NP 23374 Intelligent transport systems - Automated valet parking systems (AVPS) - System framework, communication interface, and vehicle operation ТК-97
ISO/TC 204 ISO/NP TS 22726-2 Intelligent transport systems - Dynamic data and map database specification for connected and automated driving system applications - Part 2: Logical data model of dynamic data ТК-97
ISO/TC 127/SC 2 ISO/NP 21815 Earth-moving machinery - Collision awareness and avoidance ТК-100
ISO/TC 59/SC 18 ISO/NP 22058 Construction procurement- guidance on the development of strategy and tactics ТК-101
ISO/TC 59/SC 15 ISO/NP 15928-6 Houses - Description of performance - Part 6: Contributions to sustainability and sustainable development ТК-101
ISO/TC 59/SC 13 ISO/NP 19650-4 Organization of information about construction works - Information management using building information modelling - Part 4: Information exchange ТК-101
ISO/TC 292 ISO/NP 22361 Security and resilience - Crisis Management - Guidelines for developing a strategic capability ТК-102
ISO/TC 292 ISO/NP 22379 Security and resilience - Guidelines for hosting and organizing large citywide events ТК-102
ISO/TC 258 ISO/NP TS 21512 Earned Value Management (EVM) in Project and Programme Management - Implementation Guide ТК-106
ISO/TC 37/SC 4 ISO/NP 24623-2 Language resource management - Corpus Query Lingua Franca (CQLF) - Part 2: Ontology: Single-stream architectures ТК-108